Safety cutting tools

Safety cutting tools

ESSG Battery powered hydraulic safety cutter to max. 105 mm dia.

essg105l.png

-
+
  • puk02iec-pic.eps
  • puk13gs-pic.eps
  • BG-approved safety cutter for cutting live Cu/Al cables without steel armouring which, in case of a failure, may carry voltages of up to 60 kV
  • Single-conductor lives cables without steel armouring can be cut under voltage of up to 110 kV/60 Hz
  • High-performance 3.3 Ah Li-Ion battery

Characteristics

  • 2-stage hydraulic system with fast feed and power stroke
  • Electronic control
  • Multifunction LED for maintenance display and charge status display of the battery
  • LED display for service interval after 250 cuts
  • 10 m non-conducting hydraulic hose with a coupling to connect to pump ESSG-L
Head type Cutting range Cutting force Cutting time Operating pressure Battery voltage (V) Battery capacity Charging time Hydraulic oil Article Part No. Weight Ambient temperature
open (SSK65) max. 65 mm dia. (depending on cable type) 35 approx. 21 - 40 s 625 18 3.3 Ah, Li-Ion 60 Special oil Rivolta S.B.H.11 Battery powered hydraulic safety cutter, max. 65 mm dia. ESSG65L 10.12 -20° C to +40
closed (SSKG85) max. 85 mm dia. (depending on cable type) 60 approx. 21 - 40 s 625 18 3.3 Ah, Li-Ion 60 Special oil Rivolta S.B.H.11 Battery powered hydraulic safety cutter, max. 85 mm dia. ESSGG85L 9.98 -20° C to + 40
open (SSK105) max. 105 mm dia. (depending on cable type) 80 approx. 21 - 40 s 625 18 3.3 Ah, Li-Ion 60 Special oil Rivolta S.B.H.11 Battery powered hydraulic safety cutter, max. 105 mm dia. ESSG105L 13.13 -20° to +40
Item Part No.
Battery 18 V / 3.3 Ah, Li-Ion (54 Wh) Battery 18 V / 3.3 Ah, Li-Ion (54 Wh) RAL3
Charger for 18 V Li-Ion batteries Charger for 18 V Li-Ion batteries LGL3
Plastic case for ESSG65L and ESSG105L Plastic case for ESSG65L and ESSG105L KKESSGL
Plastic case for ESSGG85L Plastic case for ESSGG85L KKESSGG85L
Earthing kit Earthing kit EG1

© 2013 Gustav Klauke GmbH, all rights reserved. Technical changes and errors reserved.