Speed Punch™ punch system

Description
  • Innovative threadless punch profile
  • Easy and quick handling as the screwing and unscrewing of the counter nut is not required
Suitable for
  • Mild steel (St37), plastic and aluminium up to 3.5 mm
Operation
  • Hydraulic
Predrilling
  • Draw stud 9.5 mm dia.; pilot drill 9.7 mm dia.
    draw stud 19.0 mm dia.; pilot drill 20.5 mm dia.
Scope of supply
  • Complete system including punch and die
Additional information
  • Counter nuts and draw studs must be ordered separately, they are not included in scope of supply
 
 
Punch size Max. Material thick-ness Individual parts for manual operation Draw studs + Accessories for hydraulic units 52055436-14-tab-cat.eps Complete unit
Draw studs
True dimen-sion Standard size 52055436-11-tab-cat.eps 52055436-12-tab-cat.eps 52055436-13-tab-cat.eps 52055436-31-tab-cat.eps
mm Pg ISO mm Punch Die Hydr. pump 50159062 50250973 Speed lock Part No.
Punch and die ISO 16 (16.2 mm)
16.2 ISO 16 3.5 52066021 52066022 52066001 52066002 52055431
Punch and die ISO 20 (20.4 mm)
20.4 PG 13 ISO 20 3.5 52066023 52066024 52066001 52066002 52055432
Punch and die PG 16 (22.5 mm)
22.5 PG 16 3.5 52065998 52065999 52066001 52066002 52055433
Punch and die ISO 25 (25.4 mm)
25.4 ISO 25 3.5 52066025 52066026 52066001 52066002 52055434
Punch and die ISO 32 (32.5 mm)
32.5 ISO 32 3.5 52066027 52066028 52047818 52047817 52055435
Punch and die ISO 40 (40.5 mm)
40.5 ISO 40 3.5 52066029 52066030 52047818 52047817 52055436
Punch and die ISO 50 (50.8 mm)
50.8 ISO 50 3.5 52066031 52066032 52047818 52047817 52055437
Punch and die ISO 63 (64.0 mm)
64.0 ISO 63 3.5 52066033 52066034 52047818 52047817 52055438
  Article Part No.
Speed Punch™ Speed lock and draw stud 9.5 mm for ISO 16/20/25 and PG 16 Speed Punch™ Speed lock and draw stud 9.5 mm for ISO 16/20/25 and PG 16 52055439
Speed Punch™ Speed lock and draw stud 19.0 mm for ISO 32/40/50/63 Speed Punch™ Speed lock and draw stud 19.0 mm for ISO 32/40/50/63 52055440