Klauke micro - Electromechanical crimping tool EK50ML

EK 50 ML Electromechanical crimping tool 0.14 - 50 mm²

The Klauke micro with intuitive PowerSense function combines the benefits of manual crimping tools with the convenience of battery powered hydraulic crimping tools
Excellent crimps with minimum effort

Simple and safe: One-button operating concept for controlling all tool functions
Electronic control with locking function monitors full closing of the dies
Simple and safe: Automatic retraction when operation is complete
Manual retract as required
Motor stall protection
Ergonomic 2C housing in the Klauke "In-line Design"
Tool fixing point for use with balancer aid or lanyard
Very low weight and high speed for maximum efficiency
Powerful drive technology for effortless operations
Powerful 10.8 V Li-Ion battery with charge status display
LED for work area illumination
Maintenance display via LED
Project-based reporting with Klauke i-press® software package

Article	Part No.
Electromechanical crimping tool 0.14 - 50 mm²	EK50ML

Crimping force	max. 15 kN
Crimping range	0.14 - 50 mm²
Number of crimps	approx. 300 at 10 mm² Cu DIN 46234 / per battery charge
Battery voltage (V)	10.8 V
Battery capacity	1.5 Ah, Li-Ion
Charging time	approx. 40 min.
Weight incl. battery	0.96 kg
Ambient temperature	-10 °C to + 40 °C

Suitable for	Crimping range mm²
Copper tubular cable lugs and connectors
Tubular cable lugs and connectors, standard type	0.75 - 10	Crimping dies R 50, indent crimping
Tubular cable lugs and connectors, standard type	6 - 25	Crimping dies R 50, hexagonal crimp
Tubular cable lugs and connectors for solid conductors	1,5 - 10	Crimping dies M 50
Copper compression cable lugs and connectors acc. to DIN
Copper compression cable lugs (DIN 46235) and connectors (DIN 46267, part 1)	6 - 25	Crimping dies D 50
Terminals, connectors and pin terminals acc. to DIN, copper
Solderless terminals (DIN 46234), connectors (DIN 46341) and pin terminals (DIN 46230)	0,5 - 10	Crimping dies Q 50
Cable end-sleeves
Cable end-sleeves	0,14 - 50	Crimping dies AE 50
Cable connections, insulated and non-insulated
Insulated cable connections, double crimping	0,1 - 6	Crimping dies IS 50, double crimping
Insulated cable connections, single crimping	0,5 - 16	Crimping dies IS 50, single crimping
Non-insulated receptacles	0,25 - 6	Crimping dies CR 50
BNC connectors for coax cables RG 58,59,60 and 71		Crimping dies BNC 50
Turned pin connectors and receptacles	0,1 - 4	Crimping dies SB 50

	Item	Part No.
	Battery 10.8 V / 1.5 Ah, Li-Ion (16.2 Wh)	RAML1
	Charger for 10.8 V Li-Ion batteries, 230V	LGML1
	Crimping die for insulated connectors 0.5 - 6 mm²	IS5071
	Plastic case	KKEK50ML

	Item	Part No.
	Electromechanical crimping tool 0.14 - 50 mm² with RAML1 battery, without charger, crimping die, case	EK50ML-L
	L-BOXX with electromechanical crimping tool EK 50 ML 0.14 - 50 mm² and extensive additional equipment	LBOXXEK50ML